Heated fan kit

Protect posters from damp and condensation

The NOVAL heated fan kit allows you to regulate the temperature and humidity inside the cabinet a roll-out system designed to minimise condensation and protect the posters. By keeping the air above the dew point, it reduces the risk of posters becoming damp, torn or damaged as they are displayed.

Thanks to its a 250 W heater fitted with a thermostat and a hygrostat that can be adjusted independently, the system automatically adjusts its operation to suit the conditions inside the chamber.

Pre-assembled on a mounting plate, the kit is easy to install on new equipment or as a retrofit to existing equipment. One kit is recommended for 2 m² units, and two kits for 4 m² and 8 m² units.

• Poster protection: keeps the atmosphere inside the chamber above the dew point, preventing posters from becoming waterlogged and tearing as they pass through
• Adjustable dual threshold: Separate thermostat and hygrostat — adjustable cut-off based on temperature and relative humidity
• Uniform distribution: The built-in fan promotes natural convection and distributes heat throughout the entire cabinet
• Immediate installation: pre-assembled bracket for mounting on the top cross-member, fitted as standard on new equipment or as a retrofit on existing stock
• DIN rail components: thermostat, hygrostat and terminal blocks mounted on a standard 35 mm DIN rail — individual replacement without the need for specialised tools
• Designed for outdoor use: Heater suitable for temperatures ranging from −40 °C to +70 °C and a bimetallic thermostat designed for over 100,000 switching cycles

• Power supply: 230 V AC – 50/60 Hz — operating range from 207 to 258 V
• Heating power: 250 W at an ambient temperature of +20 °C
• Start-up current: 1.1 A maximum
• Regulation: separate thermostat and hygrostat, adjustable independently
• Overall dimensions: 415.4 × 121 × 94.9 mm — 340 × 115 mm support plate
• Mass: 1 kg
• Assembling the kit: bracket to be fitted to the top crossbar of the roll-out system
• Securing components: 35 mm DIN rail compliant with standard EN 60715 — 3-contact terminal blocks
• Recommended number of kits: 1 kit for a 2 m² unit — 2 kits for the 4 m² and 8 m² sizes
• General tolerances: ± 0.2 mm